Caterpillar D6T XL
$145,800.00 USD

❮ ❯

Category:	Crawler Dozers
Machine Name:	Caterpillar D6T XL
Machine Location:	San Antonio, TX
Hours:	9472
Serial Number:	GMK01653
More Info:	https://catused.com/cu/10132169
Description:	Accugrade Ready, Air Conditioner, Air Suspension Seat, Blade Tilt - Single Tilt, Blade Type - SU, Diff Steer, Engine Enclosures, Lighting, Mirrors, Online Owner's Manual , Pilot Control, Radio - Bluetooth, Ripper - Multi-Shank, ROPS - Enclosed, Screens, Steering Type - Joystick, Sweeps, Tier 1 Compliant

Yes : ✔ No : ✖ Good : ●●● Fair : ●● Poor : ●
GENERAL CONDITION
Machine Starts and is Operable	✔
S.O.S. (All Compartments)	✖
GENERAL APPEARANCE
Cleaning Required	✔
SAFETY ITEMS
ROPS Certification Plate	✔
Safety Decals In Place	✔
Safety Decals Legible	✔
OPERATOR STATION
Current O&MM	✖
Current Parts Manual	✖
Current Safety Manual	✖
ENGINE
Apparent Other Engine Damage	✖
Blow By	✖
Fuel Leaks	✖
Knocking	✖
Oil Leaks	✖
Water in Oil	✖
COOLING SYSTEM
Compression in Radiator	✖
Standard Radiator	✔
ELECTRICAL, STARTING AND CHARGING SYSTEM
Alternator	●●●
Batteries / Cables	●●
Starter	●●●
Wiring	●●●
TRANSMISSION
Leaks - TRANSMISSION	✖
Transmission - Noisy	✖
STEERING
Differential Steer	●●●
Differential Steering Controls	●●●
Steering Clutch	●●●
Steering Linkage	●●●
Steering Operating Condition	●●●
BRAKE
Transmission - Noisy	2nd
HYDRAULICS
Leaks - HYDRAULICS	✖
BLADE
Cutting Edge & Bits	●●●
Face / Moldboard	●●●
Pins	●●●
Push Arm	●●●
Spill Rack	●●●
Tilt Arms	●●●
Trunnions	●●●
RIPPER / GRAPPLE / WINCH
Beam / Frame	●●●
Brackets / Studs	●●●
Pins & Bushings	●●●
Ripper Lift Cylinder	●●●
Shanks / Get	●●●
UNDERCARRIAGE
Pins & Bushings Turned?	✖
FINAL DRIVES
Housings, Left	●●●
Housings, Right	●●●
Planetaries / Differential, Left	●●●
Planetaries / Differential, Right	●●●
COMMENTS, MISC. REPAIRS, GENERAL REMARKS
Pins & Bushings Turned?	The ! Lights are on but no buzzer.
Pins & Bushings Turned?	Check E/T it has lights on.
Pins & Bushings Turned?	E/Q bar may need line bore work. Can’t see the center pin but both outer pin have slack. The left side probably only needs bearings but the right side will probably need line bore work.