Cat 775G Off-Highway Truck Meets Tough Emissions Standards

Fri July 22, 2011
Aggregate Equipment Guide

The Cat 775G off-highway truck sets new performance standards for the model while meeting U.S. EPA Tier IV final emissions standards. A combination of new drive train strategies and a five percent power increase over the previous model enable the 70-ton (63.5 t) payload class truck to hold a higher gear when climbing 10 percent grades in most applications.

A number of new components and control changes boost efficiency. A key is the next generation of Cat transmission controls, named advanced productivity electronic control strategy. The system enhances productivity, fuel efficiency and drive train durability, and it enables enhanced machine control. For example, to balance fuel savings and production, two different economy shift mode selections enable the customer to tailor performance to the needs of the business, according to the manufacturer.

Advanced control systems also integrate the optional engine compression brake with automatic retarder control to enable faster downhill travel and reduced cycle times ? without increased fuel consumption.

To meet Tier IV final emissions regulations in the United States, the Cat C27 ACERT engine includes the Cat NOx reduction system and diesel oxidation catalyst. Working in combination with ACERT technology, the Cat NOx-reduction system continually diverts and cools a small volume of the engine exhaust gases, then returns the cooled gases to the combustion chamber. This process reduces cylinder temperatures and, consequently, lowers NOx formation. The no-maintenance diesel oxidation catalyst reduces certain hydrocarbons in the exhaust.

The system requires the use of ultra low sulfur diesel fuel and does not use a diesel particulate filter. In the European Union and other areas, the 775G will be configured to meet EU Stage II emissions standards, which is the EU regulation applicable to the power output of the engine.

The 775G engine produces net power of 779 hp (581 kW), and target gross weight of the truck is 246,500 lbs. (111,811 kg). As with the previous model, a number of different body options enable a customer to configure a truck to achieve optimum capacity and durability. The 775G will replace the 775F when it goes into commercial production in the fourth quarter of 2011.

Designs to

Help Operators,

Maintenance Techs

The 775G also features a new cab and other changes to help the operator do the job safely and efficiently. The operator seat is in the center of the cab, which provides more space for the operator, and the cab has access and egress from either side. The access system is equipped with stairs illuminated by LED lights.

The new cab provides a 4 dbA reduction in noise experienced by the operator, which helps the operator fight fatigue over a long work period. The left window is electrically powered for convenience, and the cab heating and cooling feature automatic temperature control. An enhanced cab pre-cleaner is available as an option to further increase air quality and extend the lives of HVAC components.

For easy access by maintenance technicians, the 775G has a ground level electrical service center and diagnostics port on the front bumper. The Cat VIMS data collection system now is standard equipment on the 775G. It allows the customer to access prognostic and diagnostic information. The optional VIMS service light on the front of the truck will indicate any machine event that affects performance.

Fluid level indication and fluid fill ports are grouped for efficient service, and fluid filters are grouped. Filter service intervals for steering, hoist/brake and transmission/torque converter have been increased from 500 to 1,000 hours.

For more information, visit www.cat.com.

This story also appears on Truck and Trailer Guide.